But this device just isn’t connecting and it won’t seem to work. Well, I figured out a workaround that you can use for that: If you’re using a Wi-Fi system that chooses automatically, you just need to get far enough away from the router to flip over to that 2.4 GHz connection. Read on to find out how I got my Wi-Fi to stick with the right frequency and learn more about the difference between 2.4 GHz and 5 GHz Wi-Fi. And go on and smash that notification bell to get updates whenever we put out a new video. But that’s only available on some routers. Either older routers or kind of higher-end wireless routers that have an actual physical switch, or they’re highly customizable with software that lets you make those changes easily in the background. But you’ll need a workaround if you have a wireless device that requires 2.4 GHz and you can only seem to get a 5 GHz connection. And 2.4 GHz is kind of the opposite. It’s a little less robust, but it can cover a greater distance and work better through walls. So, whatever the device is—in this case it’s a light bulb—I just need to get to the edge of my Wi-Fi coverage. And when I get to the edge of that coverage, it’s going to automatically flip over to that 2.4 GHz connection because that’s the only one that’s available at that distance. So in this case, like I said, I’m going to illustrate with a smart light bulb. It’s a cheaper off-brand one (read: not the Philips Hue brand). So it doesn’t use a hub. It connects directly to your Wi-Fi, which is great in some ways, but it has to be set up on that 2.4 GHz band. So I just plug it in out at the edge of the Wi-Fi coverage. And then I go through the setup process and once that’s done, once it’s confirmed and I’ve gone through that whole thing, it’s on the Wi-Fi network. Then I can go move it back wherever I want in the house. As a matter of fact, you only need that 2.4 GHz connection during setup because once it’s on the network, it’s on the network. So I was able to take 10 of these different light bulbs and set them all up kind of out in my driveway. And then I took them back into my studio and they were ready to go. If it’s a device that’s not so portable, like a smart outlet or smart light switches, you can’t just take it out to the driveway. But just remember the principle that we’re talking about here of a 2.4 GHz connection being on the edge of your router’s coverage. So if I’m using a mesh Wi-Fi system, maybe I temporarily unplug the closest router so that the device has to connect with one a little further away. Or maybe I move the router itself as far as possible from the device during the setup process. Or, hey, if you’ve got a router that lets you do it, just flip that switch. Now this is just one trick I’ve learned for how to solve this problem. I know there are others. So if you have any other tips and tricks to suggest, or if you have any questions about your situation, tell us and let’s help each other out with that.
